Publications

Google Scholar: Citation and publication listing

Selected Journal Publications (students in bold)

  1. Pant, S, Laliberte, J, Martinez, M, Rocha, B, Ancrum, D. “Effects of composite lamina properties on fundamental Lamb Wave mode dispersion characteristics”, Composite Structures, v. 124, 236-252, 2015. http://dx.doi.org/10.1016/j.compstruct.2015.01.017
  2. ElAgamy, N, Laliberté, J. “Historical development of geometrical modelling of textiles reinforcements for polymer composites: A review”, Industrial Textiles, 2014. DOI: 10.1177/1528083714555781
  3. Chaisson, M and Laliberté, J. “In situ measurement of vacuum consolidation of commingled thermoplastic composites using a non-contact displacement sensor”, Journal of Reinforced Plastics and Composites, v. 23, 2046-2063, 2014. DOI: 10.1177/0731684414553282
  4. Pant, S, Laliberté, J, Martinez, M and Rocha, B. “Full derivation of Lamb wave equations for an n-layered anisotropic composite laminate”, Journal of Composite Structures, 566-579. 2014. DOI: http://dx.doi.org/10.1016/j.compstruct.2014.01.034.
  5. Couture, A, Laliberté, J and Li, C. “Mode I Fracture Toughness of Aerospace Polymer Composites Exposed to Fresh and Salt Water” Chemical and Materials Engineering, v. 1, n. 1, 2013. (http://www.hrpub.org/journals/jour_info.php?id=55)
  6. Laliberté, J, Kraemer, K, Dawson, J and Miyata, D. “Design and Manufacturing of Biologically Inspired MAV Wings Using Rapid Prototyping”, International Journal of Micro Aerial Vehicles, v. 5, n. 1, 2013. (http://www.multi-science.co.uk/ijmav.htm)
  7. Wu, X, Zhang, Z and Laliberté, J. “A Higher-Order Theory for Crack Growth in Fiber-Metal Laminates Under Generalized Plane-Stress Conditions,” Journal of Mechanics of Materials and Structures, v. 1, n. 3, 431-445, 2006.
  8. Laliberté, J, Straznicky, PV and Poon, C. “Impact Damage in Fiber Metal Laminates”, AIAA Journal, v. 43, n. 11, 2445-2462, 2005.
  9. Laliberté, J, Poon, C, Straznicky, PV and Fahr, A. “Post-Impact Fatigue in Fiber-Metal Laminates”, International Journal of Fatigue, v. 24, 249-256, 2002.
  10. Laliberté, J, Poon, C, Straznicky, PV and Fahr, A. “Applications of Fibre-Metal Laminates in Airframe Structures”, Polymer Composites, v. 21, n. 4, 558-567, 2000.
  11. Fahr, A, Chapman, CE, Forsyth, DS, Poon, C and Laliberté, J. “Nondestructive Evaluation Methods for Damage Assessment in Fiber‐Metal Laminates”, Polymer Composites, v. 21, n. 4, 568-575, 2000.
  12. Katchmar, R, Goulet, E and Laliberté, J. “Influencing Solder Joint Reliability in Area Array Packages”, International Journal of Microcircuits and Electronic Packaging, v. 20, n. 4, 545-555, 1997.

Selected Conference Papers (students in bold)

  • ElAgamy, N, Martin, C, Sachdeva, T, Laliberte, J. “Proposed procedure to simulate 3D multi-mode fatigue behaviour in laminated CFRP using Micro-CT scans in ABAQUS”, The Composites and Advanced Materials EXPO (CAMX), Orlando FL, October 2014.
  • ElAgamy, N, Laliberte, J, Gaidies, F, Goldak, J. “Qualitative Characterization of Fatigue Damage Propagation in Laminated Carbon Fibre Reinforced Polymers by Using Micro-Computed Tomography”. SAMPE Technical Conference, Seattle WA, June 2-5, 2014.
  • Halgrimmson, B, Dewar, A, Laliberté, J. “3D Printing From Art to Science: Designing for a Transformative Technology” Industrial Design Society of America International Conference and Education Symposium, Austin TX, August 2014. [full paper]
  • Polowick, C, Straznicky, PV, Laliberté, J. “A Study of the Quality of Complex Parts made using the Mouldless VARTM Method”, 19th International Conference on Composite Materials, Montreal, July 2013.
  • Pant, S, Laliberté, J, and Martinez, M. “Structural Health Monitoring (SHM) of Composite Aerospace Structures using Lamb Waves”, 19th International Conference on Composite Materials, Montreal, July 2013.
  • Laliberté, J, Schramm, C and Steele, AL. “A Preliminary Study of the Design Approaches to Project Work Undertaken by Undergraduate Engineering Students”, Canadian Engineering Education Association Conference, Montreal, June 2013.
  • Rutkay, B and Laliberté, J. “A Process for the Design and Manufacture of Propellers for Small Uninhabited Aerial Vehicles”, Canadian Aeronautics and Space Institute (CASI) AERO 2013 Conference, Toronto, April 2013.
  • Steele, A and Laliberté, J “GeoSurv II Unmanned Aerial Vehicle: A major undergraduate project with multidisciplinary teams”, Canadian Engineering Education Association Conference, St. John’s, NL, May 2011.
  • Samson, C, Straznicky, PV, Laliberté, J, Caron, R, Ferguson, S. Archer, R. “Designing and Building an Unmanned Aircraft System for Aeromagnetic Surveying”, Society of Economic Geologists 2010, Keystone, Colorado, October 2010.
  • Pant, S, Mahendran, M, Straznicky, PV and Laliberté, J. “Characterization and Comparison of Double-Bagging Effects on 1-D Permeability for Vacuum Assisted Resin Transfer Moulding (VARTM) Process”, SAMPE 2010 International Conference and Exhibition, Seattle, May 2010.
  • Djokic, D, Laliberté, J, Cole, R, Jablonski, A. “Review of Composite Materials for Micro- and Nano-Satellites Applications”, SAMPE 2010 International Conference and Exhibition, Seattle, May 2010.
  • Maley, J, Kratz, J, Laliberté, J, and Straznicky, PV.  “Low Cost Manufacturing of Carbon Fibre: A Comparison of Manufacturing Methods”, 6th Canadian-International Composites Conference (CANCOM 2007), Winnipeg, MB, August 2007.
  • Jodoin, A, Laliberté, J, Backman, D, Mendis, Y., and Straznicky, P.V.  “Experimental Analysis of Diagonal Tension in Cylindrical GLARE Structures”, CANCOM 2005, Vancouver, BC, August 2005.
  • Laliberté, J, Poon, C and Kok, L.  “Failure Modes in Riveted Fibre-Metal Laminate Joints”, CANCOM 2003, Ottawa, ON, August, 2003.
  • Laliberté, J, Straznicky, PV and Poon, C.  “Numerical Modelling of Low Velocity Impact Damage in Fibre-Metal Laminates”, International Council of the Aeronautical Sciences 2002 Congress, Toronto, ON, September 2002.
  • Laliberté, J, Straznicky, PV and Poon, C.  “Mode-I Delamination in Cross-Ply Fibre-Metal Laminates”, 10th International Congress of Fracture, Honolulu, December 2001.
  • Laliberté, J, Straznicky, PV and Poon, C.  “Post Impact Shear Behaviour in GLARE”, CANCOM 2001, Montreal, QC, August 2001.
  • Laliberté, J, Poon, C, Straznicky, PV and Fahr, A.  “Post-Impact Fatigue in Fiber-Metal Laminates”, 2nd International Conference on the Fatigue of Composites, Williamsburg, VA, June 2000.
  • Pant, S, Arab, M, Laliberté, J and Martinez, M. “Development of Structural Health Monitoring (SHM) System for Aerospace Structures”, Canadian Aeronautics and Space Institute (CASI) AERO 2013 Conference, Toronto, April 2013.
  •  Li, C, Teng, T, Couture, A, Hamilton, J, Benak, T, Li, G and Laliberté, J.  “Environmental Degradation of Composite Aircraft Structures”, HOLSIP 2012 Workshop, January 2012.
  • Kraemer, K, Miyata, D and Laliberté, J, “Building Better Wings: Advancing the Design and Fabrication of Flapping Wing MAVs” Unmanned Systems Canada Conference, Montreal, QC, November 2010.
  • Laliberté, J, Jablonski, AM, Djokic, D and Cole, R. “An Introduction to the use of the Lightweight Materials for Micro- and Small-Satellites”, 15th CASI Astronautics ASTRO Conference, Toronto, Canada, May 2010.
  • Schnackenburg, K, Martinez, M, Laliberté, J and Dawson, J.  “Towards Better Artificial Insect Wings for Flow Visualization and Micro-Air Vehicles” 2007 International Conference on Adaptive Structures Technology (ICAST), Ottawa, ON, October 2007.
  • Laliberté, J, Mahendran, M, Djokic, D, Li, C, and Kratz, J.  “Effect of Process-Induced Residual Stresses on Fatigue Crack Initiation and Growth in Fibre Metal Laminates”, International Committee on Aeronautical Fatigue (ICAF) Symposium 2007, Napoli, Italy, May 2007.
  • Djokic, D, Laliberté, J, Rogers, J, Fisher, K and Nunn, K.  “Adhesive Bonding of Primary Composite Aircraft Structure Using Localized Convective Heating”, SAMPE 2005 Fall Technical Conference, Seattle, USA, October 2005.
  • Laliberté, J, Poon, C, Straznicky, PV, Kok, L, and Rans, C.  “Overview of Fibre Metal Laminate Fatigue Testing”, International Committee on Aeronautical Fatigue Symposium, Hamburg, Germany, June, 2005.
  • Poon, C, Laliberté, J, Straznicky, PV, Mendis, Y and Kok, L.  “Development of Glare Fuselage Panels Using a Building Block Approach”, 5th Joint Canada-Japan Workshop on Composites, Yamagata, Japan, September 2004.
  • Jodoin, A, Laliberté, J, Poon, C, Mendis, Y, Straznicky, PV, and Kok, L.  “Diagonal Tension in Stiffened Aluminum and FML Cylinders”, 52nd CASI Conference, Montréal, QC, April 2003.
  • Laliberté, J, Poon, C, Straznicky, PV, Fawaz. Z and McCuaig, K.  “Post-Impact Biaxial Fatigue Crack Growth in GLARE”, 21st Symposium of the International Committee on Aeronautical Fatigue,Toulouse, France, June 2001.
  • Fahr, A, Chapman, CE, Laliberté, J and Poon, C.  “Non-Destructive Evaluation of Fiber-Metal Laminates” 7th International Conference on Composites Engineering, Denver, CO, July 2000.
  • Poon, C, Laliberté, J and Straznicky, PV.  “Review of Fibre-Metal-Laminate Technology”, 3rd Joint Canada-Japan Workshop on Composites, Kyoto, 2000.
  • Laliberté, J, Poon, C and Straznicky, PV.  “Application of Fibre-Metal Laminates in Airframe Structures”, SPE – Polymer Composites ’99, Quebec City, QC, October 1999.
  • Fahr, A, Chapman, CE, Forsyth, DF, Laliberté, J and Poon, C.  “Non-Destructive Evaluation Methods for Damage Assessment in Fibre-Metal Laminates”, SPE- Polymer Composites ’99, Quebec City, QC, October 1999.
  • Laliberté, J, Poon, C and Straznicky, PV.  “Impact Damage Tolerance in Composites and Fibre Metal Laminates”, Canada-Taiwan Symposium on Aircraft Materials Testing, Maintenance and Repair, Ottawa, ON April 1999.
  • Mrad, N, Sparling, S, Komorowski, J and Laliberté, J.  “Strain Monitoring and Fatigue Life of Bragg Grating Fiber Optic Sensors”, SPIE 6th Annual International Symposium on Smart Structures and Materials, Newport Beach, CA, March 1999.
  • Tasson, M, Deeb, A. and Laliberté, J. “Autonomous Navigation and Control of a Micro Air Vehicle in GPS-denied Environments”, winner student paper competition, USC 2012 Conference, Ottawa, November 2012.
  • Mahmud, K, Laliberté, J, and Benyamin-Seeyar, A. “‘Saviour’ Unmanned Aerial and Ground Vehicle System for Surveillance, Detection and Detonation of Improvised Explosive Devices”, finalist student paper competition, USC 2011 Conference, Quebec City, November 2011.
  • Kraemer, K, Sluis, F, Laliberté, F and Miyata, D. “Evolving the Design and Manufacture of Flapping Wings Through Rapid Prototyping” CASI AERO’11, Montreal, QC, April 2011
  • Chiasson, M and Laliberté, J. “Low Cost Processing of Commingled Thermoplastic Composites”, CASI AERO’11, Montreal, QC, April 2011.
  • Couture, A, Li, C and Laliberté, J “Assessment of Environmental Degradation of Bond in Composite Sandwich Structure using Single Cantilever Beam Test”, CASI AERO’11, Montreal, QC, April 2011.
  • Mahendran, M, Shashank, P, Straznicky, PV and Laliberté, J. “Feasibility Study on Closed Cavity Bag Moulding (CCBM) for Novel Mouldless Manufacturing of Carbon Epoxy Composites” Canadian Aeronautics and Space Institute AERO 2009 Conference, Ottawa, May 2009.
  • Laliberté, J, Poon, C and Straznicky, PV. “Low Velocity Impact Damage in GLARE Fibre-Metal Laminates”, 12th International Conference on Composite Materials, Paris, France, July 1999.

Posted by . Last modified on August 19, 2015.